Wireless Microphone
Sinbosen UHF multi-function musical instrument microphone S-908 karaoke wireless microphone
Item No.: S-908
Brand: Sinbosen
Type: Wireless microphone
Frequency Range: 510 MHz - 530MHz
Working distance: 50m
Warranty: 2 years
Shippent: DHL/TNT/EMS
Payment: T/T, Paypal, Western Union, Money Gram, L/C
Type: Wireless microphone
Frequency Range: 510 MHz - 530MHz
Working distance: 50m
Warranty: 2 years
Shippent: DHL/TNT/EMS
Payment: T/T, Paypal, Western Union, Money Gram, L/C
Description
The multi-function wireless microphone is equipped with a transmitter and a receiver, each of which has 16 selectable frequency points, and multiple different groups of frequencies do not interfere with each other when used at the same time. Built-in 3. 7 V lithium battery, long life, energy saving and environmental protection. The transmitter can adjust the high and low sensitivity for vocal or musical instrument signal transmission.
1. Use the frequency of the UHF band.
2. Both the receiver and the transmitter use a 3.7 V lithium battery, which is economical and durable.
3. Easy to carry and strong anti-interference ability.
4. Can be applied to vocal or musical instrument signal transmission.
5. Reduce the reception dead angle, overcome the shortcomings of the receiver's sound output interruption or instability.
6. The maximum working distance is 50 meters, and the ideal space is 30 meters.
2. Both the receiver and the transmitter use a 3.7 V lithium battery, which is economical and durable.
3. Easy to carry and strong anti-interference ability.
4. Can be applied to vocal or musical instrument signal transmission.
5. Reduce the reception dead angle, overcome the shortcomings of the receiver's sound output interruption or instability.
6. The maximum working distance is 50 meters, and the ideal space is 30 meters.
Instructions
1. Please use the transmitter and receiver to connect the charger to charge enough power before use.
2. Switch the power supply and sensitivity adjustment switch of the transmitter to the corresponding position. If it is used for vocal transmission, please switch to the vocal position. If it is used for saxophone, please switch to the instrument position. At the edge of the saxophone flare, adjust the microphone head about 15 cm outside the saxophone flare.
3. Set the transmitter to a frequency, such as A1, by a frequency code adjustment switch.
4. Push the receiver power switch to the mute position first, then push it to the on position, and then pass the frequency code adjustment switch to match the code setting with the transmitter code, such as A1. At this time, the receiver receives the signal and the RF light is on. Start.
5. Plug the audio output connector into a power amplifier, mixer, or other audio device.
Note: Please keep the lithium battery fully charged. If the battery is exhausted, it will shorten the life of the lithium battery.
2. Switch the power supply and sensitivity adjustment switch of the transmitter to the corresponding position. If it is used for vocal transmission, please switch to the vocal position. If it is used for saxophone, please switch to the instrument position. At the edge of the saxophone flare, adjust the microphone head about 15 cm outside the saxophone flare.
3. Set the transmitter to a frequency, such as A1, by a frequency code adjustment switch.
4. Push the receiver power switch to the mute position first, then push it to the on position, and then pass the frequency code adjustment switch to match the code setting with the transmitter code, such as A1. At this time, the receiver receives the signal and the RF light is on. Start.
5. Plug the audio output connector into a power amplifier, mixer, or other audio device.
Note: Please keep the lithium battery fully charged. If the battery is exhausted, it will shorten the life of the lithium battery.
More details
| Comprehensive performance | |
Carrier frequency: UHF 510 MHz - 530MHz Frequency stability: < ±30ppm Dynamic range: > 90dB Harmonic distortion: < 0 . 5 % Frequency response: 80Hz ~ 12 KHz Audio output: 0 - 200m V |
|
| Receiver | Microphone transmitter |
|
|
Use the power supply voltage: 3.7V lithium battery Power consumption: 4 WATT Signal to noise ratio: > 98 dB False image interference ratio: > 80 dB Receiving sensitivity: < 5 dBu ( SINAD = 20dB ) Battery life: about 5 hours |
Transmit power: ≤10 mW Modulation method: FM , F3F Maximum modulation: 75 KHz Higher harmonics: less than the main wave reference 4 0dB or more Use power: 3.7V lithium battery Battery life is about 2.5 hours |
 |
 |
 |
 |
 |
 |
