How to bridge the D series amplifier?
Views : 3789
Update time : 2024-09-04 18:33:00
As Sinbosen's best-selling digital amplifier series, the D series not only has top-quality accessories: such as high-quality gallium nitride power tubes, original capacitors imported from Japan. And the D series amplifier can work stably and continuously in the 2Ω state. The mini 1U size is easy to carry and suitable for outdoor performances such as touring performances, which is widely loved by people. The built-in temperature protection, overcurrent protection, and short-circuit protection also guarantee the long-term operation of the amplifier to the greatest extent.
Today we are going to introduce the bridging function of the D series amplifier, and will also explain in detail the power of each product after bridging.
Step 1: Set the connector joint to 1+2-, as shown in the figure below
Step 2: Turn switch 3 on the back of the amplifier to the right, as shown in the figure below
Step 3: Connect the XLR cable input on the A&C channel and connect the speaker cable on the A&C channel, as shown in the figure below
It should be noted that in bridge mode, there are signals in the A and C channels. There is no signal in the B and D channels.
The following is the power of the Sinbosen D series 2-channel amplifier after bridging:
The following is the power of the Sinbosen D series 4-channel amplifier after bridging:
As a professional speaker and amplifier manufacturer, SInbosen is committed to developing and manufacturing satisfactory sound products. We have perfect after-sales rules, and the amplifier products purchased from Sinbosen have corresponding after-sales warranty terms within three years. For details, please visit the official website:
https://www.sinbosenaudio.com/
Today we are going to introduce the bridging function of the D series amplifier, and will also explain in detail the power of each product after bridging.
Step 1: Set the connector joint to 1+2-, as shown in the figure below
Step 2: Turn switch 3 on the back of the amplifier to the right, as shown in the figure below
Step 3: Connect the XLR cable input on the A&C channel and connect the speaker cable on the A&C channel, as shown in the figure below
It should be noted that in bridge mode, there are signals in the A and C channels. There is no signal in the B and D channels.
The following is the power of the Sinbosen D series 2-channel amplifier after bridging:
| Model | D2-3000 | D2-3500 | D2-4200 | D2-4500 |
| 8Ω/Bridge | 1 x 10200W | 1 x 12500W | 1 x 15600W | 1 x 16400W |
| 4Ω/Bridge | 1 x 14280W | 1 x 14800W | 1 x 17000W | 1 x 17200W |
The following is the power of the Sinbosen D series 4-channel amplifier after bridging:
| Model | D4-1300 | D4-1500 | D4-2000 | D4-3000 | D4-3500 |
| 8Ω/Bridge | 2 x 4800W | 2 x 5000W | 2 x 6800W | 2 x 10000W | 2 x 12000W |
| 4Ω/Bridge | 2 x 6000W | 2 x 6000W | 2 x 9520W | 2 x 13000W | 2 x 13200W |
As a professional speaker and amplifier manufacturer, SInbosen is committed to developing and manufacturing satisfactory sound products. We have perfect after-sales rules, and the amplifier products purchased from Sinbosen have corresponding after-sales warranty terms within three years. For details, please visit the official website:
https://www.sinbosenaudio.com/
