Temperature Display
D4-3000 Temperature display GaN 3000 Watt 4 channel Amplifier
Item No.: D4-3000 ( Temperature display )
Channel: 4 channel power amplifier
Feature: 1U/Digital Amp/2 Ohms Stable
8Ω Stereo Power (RMS): 3,000W X 4CH
4Ω Stereo Power (RMS): 5,000W X 4CH
2Ω Stereo Power (RMS): 6,500W X 4CH
Feature: 1U/Digital Amp/2 Ohms Stable
8Ω Stereo Power (RMS): 3,000W X 4CH
4Ω Stereo Power (RMS): 5,000W X 4CH
2Ω Stereo Power (RMS): 6,500W X 4CH
Description
D-Series Digital amplifier with temperature display
D-Series digital amplifiers can now be equipped with a temperature display module at no additional cost. This upgrade improves the reliability and safety of the power amplifier: the temperature monitoring display module can monitor the operating temperature of the power amplifier in real time to prevent equipment damage or safety accidents caused by overheating. By monitoring the temperature, you can ensure that the amplifier is operating within a safe temperature range, thereby extending the life of the equipment.However, it should be noted that the temperature monitoring module itself may also require maintenance, such as sensor calibration and replacement, which may increase the probability of maintenance.
FEATURE:
►4 x 6200W into 2ohms,4 x 5000W into 4ohms,4 x 3000W into 8ohms
►High Quality Nippon Chemi-Con/Nichicon capacitors from Japan
►Gallium Nitride Transistors,Stable at 2 ohms long-term load
►Active PFC,soft-switching for high adaptability
►Wide voltage range of 90V-270V for harsh environments
►Efficiency,energy conservation, environmental protection
►Standby sleep mode，power-saving and durable
►High Quality XLR*/Speakon connectors
►Damp Factor >5000 @20-200Hz,Powerful and profound low frequency
►Ideal for line array,top speaker,full range speaker. For dual 18" subwoofer,it can only work stably at 4 ohms.
Product Detail
FRONT PANEL FEATURE
REAR PANEL FEATURE
Dimensions and Cooling system
►RELATED PRODUCTS:
D-Series digital amplifiers can now be equipped with a temperature display module at no additional cost. This upgrade improves the reliability and safety of the power amplifier: the temperature monitoring display module can monitor the operating temperature of the power amplifier in real time to prevent equipment damage or safety accidents caused by overheating. By monitoring the temperature, you can ensure that the amplifier is operating within a safe temperature range, thereby extending the life of the equipment.However, it should be noted that the temperature monitoring module itself may also require maintenance, such as sensor calibration and replacement, which may increase the probability of maintenance.
FEATURE:
►4 x 6200W into 2ohms,4 x 5000W into 4ohms,4 x 3000W into 8ohms
►High Quality Nippon Chemi-Con/Nichicon capacitors from Japan
►Gallium Nitride Transistors,Stable at 2 ohms long-term load
►Active PFC,soft-switching for high adaptability
►Wide voltage range of 90V-270V for harsh environments
►Efficiency,energy conservation, environmental protection
►Standby sleep mode，power-saving and durable
►High Quality XLR*/Speakon connectors
►Damp Factor >5000 @20-200Hz,Powerful and profound low frequency
►Ideal for line array,top speaker,full range speaker. For dual 18" subwoofer,it can only work stably at 4 ohms.
Product Detail
FRONT PANEL FEATURE
REAR PANEL FEATURE
Dimensions and Cooling system
|
NOTE:
The size is 437mm inside of the device(without the cover plate and front panel).The size is around 472mm of the complete device,but a little bit different size in the different front panel.Some series with different size that had not shown,please learn it in the parameter. Tunnel through cooling system Cold air comes in from the front panel of the equipment, forms a duct through the radiator to take the heat away and out from the rear panel of the equipment. |
 |
Click here to view the Speaker Matching of D4-3000:
Reference Sheet for Sinbosen Amplifier and High End 3.0 Speaker Matching!
►RELATED PRODUCTS:
 |
 |
 |
 |
 |
