Speaker Splitter Cables
NLT8F to 2x NLT4M Cable 4x4mm² | Y Splitter Breakout Wire
Description
SpeakON NLT8FX 1-to-2 Multicore Speaker Y-Cable (CH1 0.7M / CH2 1.2M)
A professional SpeakON multicore speaker Y-cable engineered for PA and touring sound reinforcement. The output end carries a SpeakON NLT8FX frame connector, which branches into two individually identified channels — CH1 0.7 m and CH2 1.2 m — each terminated with a Neutrik NLT4MX plug. Drive a 2-way speaker system, or split one amplifier channel to two destinations with a single clean cable run.Key Features
1. SpeakON NLT8FX Frame Connector at the Output End The NLT8FX frame connector locks firmly to its mating partner with a secure bayonet-style coupling, resisting accidental disconnection under the vibration of rigging, load-in and transport. A rugged housing combined with the MG40A overmolded strain relief protects the cable-exit point from repeated flex and pull stress.
2. Neutrik NLT4MX Plugs on Both Branches Each channel terminates in a Neutrik NLT4MX plug with a positive-locating locking sleeve.The sleeve is printed with "CLOSE / OPEN" and direction arrows, so connectors are engaged correctly the first time — even when the crew is working fast under stage light.
3. True 1-to-2 Multicore Split Built as a single multicore speaker cable rather than two cables joined by a splitter, both
channels run in one jacket. That means fewer connectors to fail, a cleaner stage layout, and no extra cable to coil, store or lose between gigs.
4. Per-Channel Length Labels Each branch is permanently labeled CH1 0.7M and CH2 1.2M (NO.01). You always know which lead is which and exactly how far it reaches — no guesswork during rush setup and no risk of swapping channels mid-show.
5. Blue Identification Ring Beyond the labels, every NLT4MX plug carries a blue identification ring, giving a second visual
reference that keeps CH1 and CH2 straight in crowded cable runs.
6. Tour-Grade Black Jacket The smooth, abrasion-resistant black outer sheath stands up to repeated bending, dragging and foot traffic on stage decks, while keeping your cable management neat and professional.
7. Ready to Use Out of the Case Delivered fully terminated and channel-labeled — straight from the road case to the venue, with no soldering, termination or on-site assembly required.
Applications 2-way speaker systems · amplifier channel splitting · stage boxes and front-of-house runs · touring rigs · rental and installation companies
